Shinola Audio The Rose Gold Runwell Turntable
Shinola Audio The Rose Gold Runwell Turntable
Shinola Audio The Rose Gold Runwell Turntable

The Rose Gold Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast.

Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.

Wow and Flutter < 0.1%

 
Gain - 35.4db @ 1KHz
 
RIAA Conformance Deviation
Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz.
 
Input Overload
> 200mv at 1KHz
 
Input Impedance
47kohm in parallel with 200pf
 
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted
> 82db
 
Gain 1kHz MM
35.4dB (jumpers open)
 
Gain 1kHz MC
55.1dB (jumpers installed)
 
Termination impedance, MM gain resistive
47kohm, via synthetic cooled termination.
 
Equivalent temperature of 47kohm input termination, midband
< 20 degrees Kelvin
 
Termination impedance, capacitive
200pF on board
 
Termination impedance, MC gain resistive
installed on input pads per cartridge requirements
 
EQ characteristic
RIAA standard
 
Infrasonic filter
Second-order maximally-flat, -3dBr at 13Hz
 
Line-level output resistance
49.9 ohms, unmated
 
Overload margins
> 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
 
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z
22Hz to 22kHz: 22uV rms
100Hz to 22kHz: 12uV rms
400Hz to 22kHz: 8.6uV rms
 
Output noise, MC gain, 10 ohm generator Z
22Hz to 22kHz: < 220uV rms
100Hz to 22kHz: < 120uV rms
400Hz to 22kHz: < 86uV rms
 
Power consumption from mains input, preamp only enabled
< 8W
 
Distortion at noise-versus-distortion inflection point
< 0.001%

Dimensions:

18” X 13.875” X 7.5” (47.6CM X 35.2CM X 19CM)

Generally incurs 7-10 business days.

 

The Rose Gold Runwell Turntable

$2,500.00
Specifications
Materials
Shipping

See our terms page for details on shipping & returns.

The Rose Gold Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast.

Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.

Wow and Flutter < 0.1%

 
Gain - 35.4db @ 1KHz
 
RIAA Conformance Deviation
Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz.
 
Input Overload
> 200mv at 1KHz
 
Input Impedance
47kohm in parallel with 200pf
 
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted
> 82db
 
Gain 1kHz MM
35.4dB (jumpers open)
 
Gain 1kHz MC
55.1dB (jumpers installed)
 
Termination impedance, MM gain resistive
47kohm, via synthetic cooled termination.
 
Equivalent temperature of 47kohm input termination, midband
< 20 degrees Kelvin
 
Termination impedance, capacitive
200pF on board
 
Termination impedance, MC gain resistive
installed on input pads per cartridge requirements
 
EQ characteristic
RIAA standard
 
Infrasonic filter
Second-order maximally-flat, -3dBr at 13Hz
 
Line-level output resistance
49.9 ohms, unmated
 
Overload margins
> 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
 
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z
22Hz to 22kHz: 22uV rms
100Hz to 22kHz: 12uV rms
400Hz to 22kHz: 8.6uV rms
 
Output noise, MC gain, 10 ohm generator Z
22Hz to 22kHz: < 220uV rms
100Hz to 22kHz: < 120uV rms
400Hz to 22kHz: < 86uV rms
 
Power consumption from mains input, preamp only enabled
< 8W
 
Distortion at noise-versus-distortion inflection point
< 0.001%

Dimensions:

18” X 13.875” X 7.5” (47.6CM X 35.2CM X 19CM)

Generally incurs 7-10 business days.